10.
Pro-C-epT Launches the MICRO-SPRAY, Spray Dryer/Chiller...
Pro-C-epT,
specialist in miniaturized lab scale process technology, launches the
MICRO-SPRAY, a new unique
SPRAY DRYER/CHILLER, used in early stage
development with new API.
9.
Smallest Automated NUTSCHE FILTER in the World...
Pro-C-epT launches a UNIQUE
miniaturised NUTSCHE FILTER DRYER for API
slurry from 1 to 5 litres, with full reporting
of all critical process parameters in Excel
for optimal development.
8.
Manesty introduces the new FlexiTab®
on Achema 2006...
Manesty will demonstrate their
new fully automated single station tablet press
at the Achema Exhibition in Frankfurt (May 15th - 19th, 2006).
The FlexiTab®
was developed to support the production of small batches and offers a
complete solution to the research and development of new tablets. The
FlexiTab® has the ability to simulate the compression forces and dwell
times of modern tablet presses. It uses B and D
type tooling and can produce the same range of tablets that are
required in manufacturing. The displacement data
and the operator analysis modes make the
FlexiTab® the most flexible tablet press in the industry.
The FlexiTab®
has the ability to produce bi- and tri-layer
tablets.
7.
CI Electronics - The new SADE SP Series sets new standards for sorting
precision...
CI Electronics Ltd, the world’s leading manufacturer
of tablet/capsule weight sorters for the pharmaceutical industry, has
launched its new SADE SP Series of tablet/capsule weight sorters, which
sets new standards for sorting precision.
All SADE SP Series models sort by weight to an
accuracy of +/- 1mg. The range includes
floor standing units with hoppers for production and clinical trial
batches as well as a bench top model suitable for smaller R&D and
formulation batches.
The design of the new feed and sort mechanisms, and
integral draught shield, provides precision handling of the tablets/capsules
on and off the weigh pan and assures consistent
sorting accuracy over 24/7 operation. SADE SP Series sorters are
fitted with the new CI MK6 weigh head for improved weighing performance
and reduced maintenance down time.
Specifically designed for use in
GMP environments, the SADE SP Series can sort most standard
shapes and sizes of tablets and capsules without
the need for any change parts. They are very easy to clean and
set up between batches and require minimum operator adjustment to ensure
consistent sorting of different tablets/capsules at optimum speed. All
product contact parts are made using electro-polished 316 Stainless
steel.
SADE SP Series sorters have
new sophisticated control software that
allows multiple sorting modes and can calculate statistical data for
inclusion in a batch report. Reports can be
printed directly on local or network printers without the need for a
dedicated PC. User ID and passwords can control access to calibration
and systems settings as well as the product and method libraries. There
is also an option for remote operation, whereby the sorter can be linked
to a central batch record or control system via the RJ45 Ethernet
connection.
SADE SP sorters are supported by
comprehensive validation documentation and a full installation
and maintenance service.
6. New
representation for Near-Infrared Spectroscopy...
CreaTES introduces
Control Development, Inc. in Belgium. In times of PAT and
on-line analyses CreaTES follows this tendency with the introduction of
NIRS using Diode Array Technology.
5. CreaTES
goes to The Netherlands with Alexanderwerk and Manesty...
CreaTES has
gained the confidence of Manesty and Alexanderwerk to expand the
territory for these represtations to The Netherlands.
CreaTES was
already active in Belgium and Luxemburg for Manesty and Alexanderwerk
and has now taken over the representation in The Netherlands from
Groneman.
4.
FPS has brought the spiral jet technology a real step further...
Are you involved in micronisation process and
fighting against problems such as high consumptions, caking of powders,
blowback, topsizes, cleanability, yields of productions, etc.?
FPS (Food and Pharma Systems),
Italy found the answer...
3.
Extract Technology changes its name to CPS...
Extract
Technology, our partner for isolators and downflow booths is
changing its name to Carlisle Process Systems Ltd. (CPS).
We kindly invite you to visit their new website at
www.carlisleprocesssystems.com or click on their logo on our
Representations/Containment page.
2. When
you want to store your storage containers...
The new LC-Container from GWS Finncont. The
foldable container with liner bag. Be economic with your storage
area...
1. We offer an alternative Pilot Scale Granulation Suite...
From manual operation over simple computer controls
with Excel reports to 21 CFR part 11 compliant software, fully validated.
With a batch capacity of 15 to 30 kg.
|
